Apr 24

For a TV-friendly Fireplace, Go Electric

Are you struggling to find balance in a room that has both a television and a fireplace?  It’s a common dilemma in many households, and one that’s not easily solved.  In most rooms, the fireplace is positioned to be the focal point, often in the centre of the longest wall.  If there were no TV to consider, furniture placement would be relatively simple.  But throw in a TV, and room arrangements become much more complex, as both the TV and the fireplace need to be the centre of attention.

With the advent of flat-screen televisions, the simplest solution is to place the TV above the fireplace.  There are 2 main concerns with this idea:

  • The heat from a wood-burning or gas fireplace is too intense for some TV’s
  • The mantel on the existing fireplace is likely too high to allow comfortable viewing of the TV above

When working with a wood- or gas-burning fireplace, these 2 issues are intertwined, because the mantel is necessary to divert the heat from the TV, and it needs to be high enough to meet clearance requirements of the fireplace below.

What to do?  If you replace your gas- or wood-burning fire with an electric fireplace, you can avoid both of these problems.  Since the flame effect of an electric fireplace is created without burning any fuel, there are no clearance issues for fireplace surrounds or mantels.  Thus, you can go without a mantel, or place the mantel low enough to allow comfortable TV watching. (We recommend that the bottom of the TV be no higher than 42” off the floor.)  And at 5000 BTU’s or less, the heat output of an electric fireplace will not damage a TV above it.  (Compare to a typical heat output of 30,000 to 40,000 BTU’s for a gas fireplace.)

An electric firebox can be inserted right into the existing fireplace opening, or you could opt to entirely remove the existing fireplace and start with a fresh new design that incorporates an electric fireplace.  Some electric fireboxes actually come with a reduced heat output, in order to minimize the wattage on the unit, so that it may be plugged into the same circuit as your TV, without overloading the circuit.   This means that if you are not in a position to add a dedicated outlet to the space, you can still have a television and a fireplace operating at the same time.

Another great reason to combine your TV with an electric fireplace is the fabulous selection of media mantels that are available.  Most entertainment mantels allow you to place your TV on or above the fireplace cabinet, while offering open storage below, for your DVD player and service provider’s ‘box’.  There are also wonderful custom cabinets available which offer storage that’s completely hidden behind the panels of the mantel, so that no one knows that your DVD’s and components are stored there.  These custom units are ideal for homes and condos where the TV room is in the living room, and you prefer to hid all the TV paraphernalia from view.

About the Author

Jeanne

has written 14 blog posts

Jeanne is the co-owner of Stylish Fireplaces by Huntington Lodge. Stylish Fireplaces has always specialized in electric fireplaces, and does not carry any other hearth categories. Jeanne is an accomplished speaker who has developed many design seminars over her career.

Comments (3)

  • carmen milito on January 25th, 2013 at 6:56am

    Does this model…DWF36PG have reduced heat output…It would have to go on the same outlet as the TV and Stereo equipment and I’m not sure if will work…love the look of this model…if there is one that has the same look as this model, but a 30″ w… please let me know. thank you, C

    • Karyn on January 30th, 2013 at 1:57pm

      Hi Carmen

      The total rated wattage of the DWF36PG is 1240W, which breaks down in the following way: 40W – Flame Effect, 600W – Heater-lo, 600W – Heater-hi. With a TV and Stereo plugged in to the same circuit, there is a potential for the breaker to trip if the heater is on full heat and the TV and Stereo are also on. If the fireplace is used in flame only, or flame and low heat modes, it would be unlikely that the breaker would trip when the TV and Stereo are also on. We recommend that the unit be plugged into its own dedicated outlet to avoid any breakers tripping and potential overheating issues, but it is not mandatory. What is very important though, is that the unit be plugged into a quality outlet. Electric heaters have a high current draw, and therefore have a potential to generate a lot of heat in high resistance connections. Old, corroded, or loose electrical outlets can potentially cause a bad connection, resulting in high heat buildup, and a risk of fire.

      We Currently do not have a smaller unit in the same look available

      Hope this helps

  • Minneapolis condos on September 27th, 2014 at 10:41pm

    I do not even know how I ended up here, but I thought this
    post was good. I do not know who you are but certainly you’re going to a famous blogger if you are not already ;) Cheers!

Leave a comment